• State TI Thinks Resolved
  • Locked Locked
  • Replies 5 replies
  • Answers 1 answer
  • Subscribers 63 subscribers
  • Views 138 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

LP5012: Ok to use single channel for White LED?

Will Jarrett
Intellectual 2835 points
Part Number: LP5012

Customer is using LP5012RUKR LED driver IC for driving 3 sets of RGBW LEDs in the below configuration. Since the LED driver supports individual LED control they are planning to utilize the last 3 channels for white LED driving . Please let me know whether this implementation is ok or not and if there might be any issues expected in firmware handling.

 

Thank you!