TPSM63610:　pspice model

Kohei Otsuki

Part Number: TPSM63610
Other Parts Discussed in Thread: TPSM63606

Hi Team,

A PSpice model of the TPSM63610 device is required to run the simulation.
Contact TI and
TPSM63606 I was able to get the PSPICE file.
However, the .lib you received seems to be garbled and cannot be used in the simulation. Could you send the correct PSPICE model again?

over 1 year ago

0 Henry Kou over 1 year ago

TI__Expert 3766 points

Hi Kohei,

It is most likely the encryption process on the file to produce such a format. What errors are you running into when simulating, and please send the .lib file for reference.

Regards,

Henry

0 Kohei Otsuki over 1 year ago in reply to Henry Kou

Prodigy 15 points

Hi, Henry,

I am attaching the file I received. please confirm.

The error message I see is 'Unknown Spice device type "1" in "17f62b1fb318c25603....' .

tpsm63610_trans.lib

0 Henry Kou over 1 year ago in reply to Kohei Otsuki

TI__Expert 3766 points

Hi Kohei,

I do not see this error on my end when I open the lib file, however please try with the attached project files which I was able to get running.

If the unknown device type error still persists it may be a library issue with one of our encrypted parts.

Regards,

Henry

TPSM63610_TRANS_r1.zip

Power management

Power management forum

TPSM63610:　pspice model

Power management

Power management forum

TPSM63610: pspice model

TPSM63610:　pspice model