USB2GPIO-LOADER-SW: firmware loader still supported?

I am not sure if this will solve your problem but there is a thread on a similar topic

https://e2e.ti.com/support/power-management-group/power-management/f/power-management-forum/704610/usb2gpio-loader-sw-cannot-find-firmware

Hi Shirish,

in the linked thread it says in the beginning that the managed to install the firmware.

That's where we struggle because the firmware loader is not available on ti.com.

https://www.ti.com/tool/USB2GPIO-LOADER-SW?keyMatch=&tisearch=search-everything&usecase=software

there is no download button ...

Where can I find the loader SW?

BR,
Stefan

The USB2GPIO product is not supported anymore. I'm trying to find the SW internally and will update this thread if it can be provided via E2E.

I was sent this installerby the external company which used to programme those adapters a couple of years ago, but now I have a problem, that the USB2GPIO2 adapter from 2022 is not detected by the loader. I have 2.2k pullups and 100kHz of the bus speed configured.

The USB2GPIO2 adapter isn't compatible with the USB2GPIO adapter so you can't use the USB2GPIO2 adapter with the loader. You'd have to obtain a USB2GPIO adapter. TI doesn't produce this adapter anymore so it can't be purchased new. Unfortunately we do not have a solution.