• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 62 subscribers
  • Views 77 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

LM61480-Q1: confusion on output capacitor selection

Dongbao Zhou
Expert 3960 points
Part Number: LM61480-Q1
Other Parts Discussed in Thread: LM61480

hello

I want to confirm the LM61480 output capacitors selection, there are three different recommend parameters in datasheet (page#34/36/49), can you help to double confirm the Cout selection?

 Regards,

Dongbao

  • +1
    TI__Guru 50120 points

    Hello Dongbao,

    Table 9-4 is the BOM that was used to collect the application curves in the datasheet and should also be the BOM on the EVM.

    I would suggest following the EVM schematic to get similar load transient performance since output capacitor selection is primarily based on the desired load transient response.

    Regards,

    Jimmy