Hello, i am Niko electical engineer at Kronoterm.
I used LP2985-10DBVR in my PCB design because i have 2 supply voltages (5V and 12V) and i need 10V output.
When i tested PCBs i figured out that output of LP2985-10DBVR is 5V not 10V. I checked datasheet and i find out that old chip had 10V output, and new one has 5V.
Is there pin to pin replacment for LP2985-10DBVR, that i could use on my PCB?
Best regards, Niko Ivezić
email: niko.ivezic@kronoterm.com
mobile: +386 51 273 127