• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 63 subscribers
  • Views 75 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

LMR51610: schematic check request

Gary Teng
Genius 5270 points
Part Number: LMR51610

Hi Sir,

could you help us check whether this schematic need to be modify? thanks for your support.

  • 0
    TI__Genius 12865 points

    Hello,

    Your schematic looks ok. However, confirm that your inductor has a saturation current rating higher than the peak high side current limit of 1.95A max listed in the datasheet. If the inductor saturates, the buck converter device may not be able to protect itself during short circuit event.

    Best regards,

    Ridge