Hi Team,
How should customer connect DSG_EN pin to ground if they do not use, should they connect through 10Kohm resistor to ground or should they connect DSG_EN pin directly to ground? Thanks a lot for your suppport to check.
Best regards
Jie
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi Team,
How should customer connect DSG_EN pin to ground if they do not use, should they connect through 10Kohm resistor to ground or should they connect DSG_EN pin directly to ground? Thanks a lot for your suppport to check.
Best regards
Jie
Hello Jie,
I'd connect with a 10-kOhm to GND.
Best Regards,
Luis Hernandez Salomon