• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 63 subscribers
  • Views 95 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Original question:

TPS62869: Target I2C address setting threshold

TPS62869: I2C address results in grey area outside of listed resistor values

Ethan Frommer
Intellectual 1330 points
Part Number: TPS62869

Hi Team,

Could you help me understand what the I2C address is set to in the grey area that is outside of the allowed window?

For example, if the resistor value was 215k, what would the address be set to?

Does it set the address to the closest resistor value or is there some error condition?

  • +1
    TI__Expert 8756 points

    Hi,

    It would set the output voltage as per the closest resistor value in the table depending on the resistance tolerances.

    There is no possibility to chose any output volatges different than the ones mentioned in the table.

    Best regards

    Sneha