CSD16301Q2: The testing report for CSD16301Q2

Zhang Liang

Expert 2325 points

Part Number: CSD16301Q2

Hi,

Are there any testing report for CSD16301Q2 below paramater testing report, thanks?

8 months ago

0 John Wallace1 8 months ago

TI__Mastermind 30875 points

Hello Zhang,

Thanks for your interest in TI FETs. TI tests these parameters 100% in production at ATE. We do not normally share production test results. Can you tell me why the customer needs this information?

Best Regards,

John Wallace

TI FET Applications

0 Zhang Liang 8 months ago in reply to John Wallace1

Expert 2325 points

Hi,

Customer feedback us the package is small for the ATE, so theny need this paramater testing report to Certification, thanks.

+1 John Wallace1 8 months ago in reply to Zhang Liang

TI__Mastermind 30875 points

Hi Zhang,

As I stated in my previous response, this device is 100% tested at ATE. Even though it is a small package, there are handlers and contactors in the factory to test this device. TI tests devices smaller than this at ATE in production. TThe customer can review the quality and reliability data for this device at the link below. Beyond that, I have no test data that I can share.

https://www.ti.com/quality-reliability-packaging-download/report?opn=CSD16301Q2

Thanks,

John

+1 Zhang Liang 8 months ago in reply to John Wallace1

Expert 2325 points

Hi John,

This is fine, we will feedback to our end cusotmer this information, thanks for your kindly support.

Power management

Power management forum

CSD16301Q2: The testing report for CSD16301Q2