• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 62 subscribers
  • Views 108 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

LMR23630: Pin to pin with higher peak current limit

Amber Si
Intellectual 1190 points
Part Number: LMR23630

Hi

Could you help recommend a higher peak current limit device that is Pin to Pin with LMR23630ADDAR? If not  Pin to Pin, you can recommend a more suitable device.

As LMR23630ADDAR  peak inductor current limit is about 6A that is too small to easily trigger OC protection when heavy load.

Thank.

Regards,

Amber

  • +1
    TI__Genius 9745 points

    Hi Amber,

    Thank you for your question. Please give us the following information so that we can properly assist you:

    What output current are you attempting to draw from the part?

    What is the peak current that you are experiencing?

    Please share a schematic of your design as well as some screenshots of this behavior on an oscilloscope.

    Thank you,

    Joshua Austria