• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 64 subscribers
  • Views 176 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Original question:

BQ25700A: BQ25700A use default mode can not charge

BQ25710: BQ25710

saravanan krishnan`
Prodigy 140 points
Part Number: BQ25710

Hi Tiger,

When the bq25710 will go for POR .When adapter power is not there,immediately Through BATFET via VSYS it will get power  always isnt?.Unless battery is below thershold it will maintain its registers isnt?

Regards,
K.Saravanan.

  • 0
    TI__Expert 3335 points

    Hi Saravanan,

    POR happens when the adapter or battery is plugged in. If the battery is above UVLO threshold, VSYS will be powered form battery though BATFET and the registers will be maintained.

    Best Regards,

    Munir