• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 62 subscribers
  • Views 97 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

LP87524-Q1: LP87524-Q1 BUCKx_FLOOR_VOUT

Johnsin Tao
Intellectual 1625 points
Part Number: LP87524-Q1

Hi  engineers:

     about the  LP87524-Q1:

     How do I  understand "BUCKx_FLOOR_VOUT"   when the floor state is used. 

     what is difference between the BUCKx_FLOOR_VOUT and  BUCKx_VOUT ？

     Thanks.

     Johnsin Tao

     

  • 0
    TI__Genius 10000 points

    Good Morning Johnsin Tao,

    When the EN_ROOF_FLOORx bit is set to 1, roof and floor control is on. In this mode, when the associated EN pin is low, the output voltage of the buck is BUCKx_FLOOR_VSET. When the associated EN pin is high, the output voltage of the buck is BUCKx_VSET.

    Kind regards,

    Conner Gillette