• State TI Thinks Resolved
  • Locked Locked
  • Replies 2 replies
  • Answers 1 answer
  • Subscribers 65 subscribers
  • Views 123 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

LM25037-Q1: UCC24624

pooja kattimani
Prodigy 30 points
Part Number: LM25037-Q1
Other Parts Discussed in Thread: TL431, , UCC24624

Hello there, I'm going to use LM25037-Q1 for controlling a half bridge converter and UCC24624 Dual-Channel Synchronous Rectifier Controller for secondary side  also an TL431 and optocoupler isolation for compensation circuit. Is it okay to implement ...

Vin=30-72V

Vout=12V

Po=400W

  • 0
    TI__Mastermind 29140 points

    Hello Pooja, 

    Thank you for your question on controlling a half-bridge. The expert on UCC24624 is out-of-office until Jan 2, 2024, but I believe this SR controller is suitable for your half-bridge application. 

    The expert for LM25037-Q1 is in another group and I have notified them to assist you.  Due to the U.S. holiday season, I'm not sure when the next reply will be.  Please allow some time into the next week. 

    Our groups do not directly support the TL431, but it is a standard feedback control and reference for many, many PWM controllers, so it should be no problem in your application. 

    Regards,
    Ulrich

  • 0
    TI__Genius 10625 points

    Hi Pooja,

    Very sorry for the delay due to the US holidays. Regarding the LM25037-Q1, it can be used as a half-bridge controller.

    Regards,

    Ray