TPS54040A: TINA simulation tool

Josh5566

Part Number: TPS54040A
Other Parts Discussed in Thread: TPS54040,

Hi Sir,

Ragarding TPS54040ADGQR, I performed a power simulation using the TINA tool.

However, it appears to be inactive when runing the DC analysis.

Could you please perform and verify the TINA file that I created?

0 Daniel Li14 6 months ago

can I know what do you need for DC analysis? As the converter need time to go to stable statues, better use transient analysis

0 Josh5566 6 months ago in reply to Daniel Li14

Thanks. I wanna mesure the voltage and some signals to confirm their accuracy correct before receiving the TPS54040ADGQR on pcba.

I also verified the waveform using scope in the TINA tool. however, the tool is still inactive.

Regarding the Tina tool, do I need to perform any setup? or is the the library for TPS54040A correct?

I have also sent the file of TPS54040.TSC for you reference as mentioned the previous message.

+1 Daniel Li14 6 months ago in reply to Josh5566

can you try this one? or you need add output capacitor for your simulation and run Analysis->transient , set time at 2ms or longer

0 Josh5566 6 months ago in reply to Daniel Li14

Thanks for your strong support. The file will be a great benefit to my design.

Thanks

Power management forum