Other Parts Discussed in Thread: TPS7A20
Whether we have UVP protection LDO?
UVP Threshold 5.6V is needed. Mid Vin is needed.
Thanks
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hey Fabio,
TPS7A20 has built-in UVLO protection for Input supply. The limits of UVLO are defined in the datasheet
Can customer tie the VIN to EN using a resistor divider circuit. When VIN rises to 5.6V, the EN will go higher than 0.9V to turn on the LDO. This is a very crude methodology and can warrant quite large variation in detection of 5.6V on input.
Regards,
Rohit Phogat