BQ40Z80: ChemID is not in BQStudio's list, even after update.

Alexandre Plouffe

Part Number: BQ40Z80
Other Parts Discussed in Thread: BQSTUDIO

Hello,

As title says I have the ChemID that the GPC tool gave me and it is a close match (below 3% error).

However, the Id is not in the list in BQStudio. I updated the chemistry list using the procedure found at this address: GASGAUGECHEM-SW Design tool | TI.com . But it's still not there.

Any help on this would be greatly apreciated.

Regards,

Alexandre

7 months ago

0 Jose Couso 7 months ago

TI__Mastermind 24291 points

Hello Alexandre,

Please check the following box if it is unchecked.

Regards,
Jose Couso

0 Alexandre Plouffe 7 months ago in reply to Jose Couso

Prodigy 40 points

Hi Jose,

Thank you for your fast reply, I have found the issue. I restarted the software and the ChemID was there.

Seems like BQStudio does not update the list after the ChemID update and needs to be restared.

Regards,

Alexandre

Power management

Power management forum

BQ40Z80: ChemID is not in BQStudio's list, even after update.