This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hello,
can you please advise on a customer request regarding purchased parts with P/N: REF5025IDGKT?
The customer stated that the parts on the same tape come with 2 different pin 1 marking sizes...
The parts we shipped have Date Code: 2330+5
Is this normal and due to the machine/tool that is used to put the markings onto the parts, or does this have a differnt background? the parts were purchased form TI directly
Hi! Please see below the explanation from our Assembly site.
This is normal. The Pin 1 here is generated from Mold (encapsulation) process by a Physical Pin.
The Physical Pin have some level of wear out that can make the size of the Pin 1 to be slightly different.