Hello,
I am considering the LMR51606 device.
I would like to create a 24V to ±15V output circuit using a common forward converter.
Is it okay to use the circuit configuration like the one attached?
Best regards,
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hello,
I am considering the LMR51606 device.
I would like to create a 24V to ±15V output circuit using a common forward converter.
Is it okay to use the circuit configuration like the one attached?
Best regards,
Hi Kaji,
Normally I wouldn't recommend this approach. I think you can do a normal buck rail, and also an inverting buck-boost design using the LMR51606.
Here is an application note for this approach:
Cheers,
Richard