• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 62 subscribers
  • Views 77 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TUSB564RNQEVM: GPIO event TPS65982

Shoo Saga
Intellectual 1701 points
Part Number: TUSB564RNQEVM
Other Parts Discussed in Thread: TPS65982, TUSB564

Hi Team,

For the EVM, GPIO0,1,2 of TUSB564 is connected to CTL0,1,FLIP. What GPIO events are configured in TPS65982.

Regards,

Shoo

  • +1
    TI__Genius 15620 points

    Hi Shoo,

    GPIO0 controls CTL0, which enables/disables USB data. This GPIO should be configured for a USB3 event.

    GPIO1 controls CTL1, which enables/disables DisplayPort. This should be configured for a DisplayPort mode select event.

    GPIO2 controls the orientation of the cable. This should be configured for a cable orientation event.

    Best,

    Shane