LP87523-Q1: Rise time and fall time of the FET's

Nagarjuna Kongara

Part Number: LP87523-Q1

Hello Team,
Could you please share the rise time and fall time of the FET's in order to calculate the Switching losses

Thanks & regards
Nagarjuna

6 months ago

0 Field Tolson 6 months ago

TI__Genius 10772 points

[deleted]

0 Nagarjuna Kongara 6 months ago in reply to Field Tolson

Prodigy 70 points

Hello Field,
I'm unable to get your answer,
How we will get the Rise time & fall time with the help of Time period.
It was Depends on the Gate charge and Gate drivers right?

Can you please elaborate?

Thanks,
K.Nagarjuna

0 Field Tolson 6 months ago in reply to Nagarjuna Kongara

TI__Genius 10772 points

Hi Nagarjuna,

I see now. My apologies, as I was confused at what was being originally asked. This information is not immediately available, so please allow me some time to look and find this for you.

Thanks,
Field

0 Nagarjuna Kongara 6 months ago

Prodigy 70 points

Hello team,
Could you please provide the required data

0 Field Tolson 6 months ago in reply to Nagarjuna Kongara

TI__Genius 10772 points

Hi Nagarjuna,

I believe I have the correct information, but have reached out to management to make sure that it is correct, and that I am able to share it publicly.

Thanks,
Field

+1 Juha Pennanen 6 months ago

TI__Prodigy 225 points

Hi Nagarjuna,

Typical rise / fall time of the LP8756-series PMIC or LP8752-series PMIC is around 1.5ns. Please note that it also depends on the PCB parasitics of the SW-node, but the value I provided is a typical value.

For efficiency calculations you can use our https://www.ti.com/tool/PEET-GUI.

Best Regards,

Juha Pennanen

0 Nagarjuna Kongara 6 months ago in reply to Juha Pennanen

Prodigy 70 points

Hi Juha,
Thank you for the information.

Power management

Power management forum

LP87523-Q1: Rise time and fall time of the FET's