• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 63 subscribers
  • Views 60 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TPS7B87-Q1: Simulation Model not working- TPS7B87-Q1

Manikumar SANKARAN
Prodigy 20 points
Part Number: TPS7B87-Q1

While run simulation in simetrix it throws error like below.

Schematic shown below.

Please help me to solve this issue

  • 0
    TI__Mastermind 29580 points

    Hello,

    For starters, it looks like your delay and PG pins are floating.  I would place a 1Meg resistor from PG to GND if you do not need to use it, and the same for the delay pin.  The simulation may or may not run as we have not tested this in SIMPLIS / SiMetrix, however you can try this to start and let us know if you have any remaining issues.

    Thanks,

    Stephen