Dear Team,
I am using TLV76733DGNR in my design
I/P = 5V (Coming from a switcher)
OP = 3.3V,1A
My schematic is given below. May I know your comments.
Regards
HARI
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hello Hari,
Thank you for your question.
Overall, this schematic looks good. I just have a couple of comments:
1) We recommend place the input and output caps as close to the device as possible.
2) Overall, there is enough headroom, pinout is correct, so please proceed forward with this design.
Best Regards,
Hannah