• State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 62 subscribers
  • Views 62 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

LP8866S-Q1: How to test loop characteristics？

Meng Liu
Intellectual 1765 points
Part Number: LP8866S-Q1

Hi Expert

How to test device loop characteristics? Does it add 10ohm resistor in FB?

  • 0
    TI__Mastermind 20855 points

    HI, Meng

    For device loop characteristics, customer can add a 50ohm resistor to FB and inject the current. Mostly we test the loop characteristics for the boost part of the device. And for this test, pls confirm that the output current is constant not a PWM duty.