• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 62 subscribers
  • Views 63 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TPS562203: Design Review

JH Shin
Mastermind 7840 points
Part Number: TPS562203

Hello,

My customer requested TI's review of the TPS562203DRLR design.

Please review their design below to see if there are any problems.

tps562203.pdf

Thank you.

JH

  • 0
    TI__Genius 17120 points

    Hi JH,

    See my comments below:

    1. Recommend to add a feedforward capacitor (parallel with upper resistor), for example 47pF.

    2. EN can be controlled by a typical divider resistor circuit from Vin or by a voltage of lower than 5.5V. In the schematic, I see both typical divider resistor and external EN signal exist. I think one of them will be good.

    Thanks!

    BRs

    Lucia