LP8764-Q1: GUI tool or register configuration

Owen Mears

Part Number: LP8764-Q1

Hello,

Is there a GUI or some other tool that would allow the user to configure the buck settings as needed, then spit out a bunch of register operations that can be used to program the buck regulators via I2C for the desired configuration?

Thank you,

Owen

3 months ago

0 Ishtiaque Panhwar 3 months ago

TI__Expert 8190 points

Hello Owen,

Yes there is GUI for LP8764-Q1 which can be used at this link: https://dev.ti.com/gallery/view/PMICInternal/Scalable-PMICs-GUI/ver/4.0.0/

You may want to look at GUI user guide here: https://www.ti.com/lit/pdf/slvubt8

And if you want to update the NVM, you may want to look at the following application note: https://www.ti.com/lit/pdf/slvaf93

BR,

Ishtiaque

Power management

Power management forum

LP8764-Q1: GUI tool or register configuration