HI team,
In order to calculate Rlim value, it require δCout2 and δCout3. but I'm not sure how to know it from 8.2.2.2 RLIM Resistor Selection of the datasheet.
Regards,
Hayashi
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
HI team,
In order to calculate Rlim value, it require δCout2 and δCout3. but I'm not sure how to know it from 8.2.2.2 RLIM Resistor Selection of the datasheet.
Regards,
Hayashi
Hi,
It is your selected capacitor tolerance, for example a capacitor selected with 1.0uF with 10% variation. Then that delta is 10% and the capacitance due to that is 0.1uF so the 1.0uF becomes 0.9uF