• State Resolved
  • Locked Locked
  • Replies 2 replies
  • Subscribers 64 subscribers
  • Views 70 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TPS552872-Q1: Current Limit Setting Resistor

Isao Takigasaki
Intellectual 2590 points
Part Number: TPS552872-Q1

Hi,

Can we choose 0 ohm as the current limit setting resistor?
Then, should ISP and ISN connected with VOUT?

Best Regards, Taki

  • 0
    TI__Mastermind 45321 points

    Hi Taki,

    thank you for using the E2E forum.
    Due to a public holiday this Thursday and Friday the expert of this device is out of office.
    Please expect a reply beginning of next week.

    Best regards,
    Stefan

  • +1
    TI__Mastermind 19500 points

    Hi Isao,

    Thanks for reaching out.

    1. May I know what is the application here?

    2. Yes, 0ohm is ok, or the customer can connect ISP and ISN to Vout directly like below. Both ISP and ISN must connect to Vout to disable the output current limit function, and can't be floating.

    3. Please also send the schematic and layout to us for review when finished.

    BRs,

    Bryce