Hi team,
I am considering an LLC circuit at high frequency.
The frequency increases at startup, but what is the maximum frequency?
Best regards,
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi team,
I am considering an LLC circuit at high frequency.
The frequency increases at startup, but what is the maximum frequency?
Best regards,
Hi Mike,
Does that mean that the upper limit of the resonant frequency is around 300kHz?
Best regards,
Hello,
Typically these are designed for 100 to 200 kHz for the resonant frequency. I have not seen 300 kHz designs.
Regards,
Hi Mike,
I heard that a 300kHz reference design was being produced, so I wanted to check the highest frequency.
Is the resonant frequency the same as the previous LLC controller?
Best regards,
Hello,
What previous LLC controller are you comparing this too?
If you design the resonant frequency to 300 kHz that is O.K. if you choose to do so. However, you need to remember that the maximum frequency is 750 kHz. You just need to use the design calculator to check your transfer function to ensure the gain meets your needs.
https://www.ti.com/tool/UCC25600-DESIGN-CALC
Regards,
Hi Mike,
The previous LLC controller is UCC2564xx.
I am considering increasing the frequency to make it more compact.
Best regards,
Hello,
Increasing the switching frequency will reduce the magnetic size. The UCC25660 should be a good choice for your design.
Regards,