Other Parts Discussed in Thread: TPS2662,
Is the TPS2660x tolerant to negative voltage transients on the output? As would be seen when opening the e-fuse with an inductive load on the output.
Thank you and best regards
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi Jessica,
TPS2660 can not support that. TPS2662 can support that.
Regards
Kunal Goel
Unfortunately the TPS2662 does not have a high enough current rating for my application.
Hi Jessica,
Inductive load will cause only transient negative voltage. You can use schottky diode at output to clamp that voltage.
Regards
Kunal Goel