UCC25600: Simulation, hardware & system design tools forum

Nithin c

Prodigy 130 points

Part Number: UCC25600

Hi,

While simulating the given circuit the signal given here

the output is not proper pulse

2 months ago

+1 Hong Huang 2 months ago

TI__Guru 50675 points

Hi,

I suggest you download the model from ti.com to start The modify the model to your need, and find which step the model stop working behaves not correctly.

+1 Nithin c 2 months ago in reply to Hong Huang

Prodigy 130 points

how i get model circuit

could you share me the link?

+1 Hong Huang 2 months ago in reply to Nithin c

TI__Guru 50675 points

Hi,

This link

www.ti.com/.../UCC25600

+1 Nithin c 2 months ago in reply to Hong Huang

Prodigy 130 points

Hi,

Now i simulated as you said the gate voltage waveform given here

it is not a perfect square wave

+1 Hong Huang 2 months ago in reply to Nithin c

TI__Guru 50675 points

Hi,

There must be something wrong with your circuit as the model has been used in many simulation. I am forwarding this to another expert to help.

Power management

Power management forum

UCC25600: Simulation, hardware & system design tools forum