• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 63 subscribers
  • Views 51 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TPS929120-Q1: When shoud I choose CONF_LDO=1? When should I choose CONF_LDO = 0?

mada ma
Prodigy 20 points
Part Number: TPS929120-Q1

Hi, Dear Support Team

              I am using TPS929120, I have a question about LDO output, as mentioned in datasheet, LDO output voltage has two opitions : CONF_LDO=1, Vldo = 5V; CONF_LDO =0,Vldo = 4.4V.

My questions is how to choose the two options.  When should I choose Vldo = 5V ? When should I choose Vldo=4.4V?  What is the aim for the design of two options?

Best regards

Mike