How to select the resistor divider on the LL/SS (pin 9) if we are using in burst disable mode (option 7). Since the LL/SS pin sets the threshold to burst mode?
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
How to select the resistor divider on the LL/SS (pin 9) if we are using in burst disable mode (option 7). Since the LL/SS pin sets the threshold to burst mode?
Hello,
Please refer to the following documentation for setting up the LL/pins.
The following link will bring you to an Excel Design Tool that you can also use to setup the LL/SS pin. However, it is recommended you read the documentation above first.
Regards,