Other Parts Discussed in Thread: USB-TO-GPIO2,
Hi Expert,
- Is "USB-TO-GPIO2" the one we need when using "Fusion Digital Power designer"?
- Do we need any other peripheral when using "Fusion Digital Power designer"?
Or just connect "USB-TO-GPIO2" to TPSM8D6B24EVM-2V0.
I have checked in this video(https://www.youtube.com/watch?v=NupULwObZR8).
It seems that we only need USB-TO-GPIO2. But I am not sure if USB-TO-GPIO2 is the one we need.
Thanks
Daniel