Hello I am a software engineer,
I observed a voltage drop when connecting power supply to a monitor PIN of TPS389006-Q1.
Does the monitor have low input impedance ?
How can I avoid this issue ?
Best regards,
Tom LEVISSE
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hello I am a software engineer,
I observed a voltage drop when connecting power supply to a monitor PIN of TPS389006-Q1.
Does the monitor have low input impedance ?
How can I avoid this issue ?
Best regards,
Tom LEVISSE
Hello Tom,
I will consult our systems team on this matter, I will provide an update by tomorrow 5/17.
Regards,
Oscar Ambriz
Hello Tom,
I have confirmed the monitoring pins are high impedance. I have a few follow up questions:
1. Is there a large current draw when connecting the source to the pin
2. How severe is the voltage drop
Regards,
Oscar Ambriz
Hello, thank you for your answer. I finally observed that the voltage drop was from another part of my circuit.
Regards,
Tom LEVISSE