UCD9081: USB2ANY and UCD9081 GUI problem

Tool/software:

Hi, 

We utilize UCD9081 on our new design.

For programming UCD9081 via I2C;

1-We use USB2ANY (HPA665) to debug/confıgure interface of UCD9081.

2-We can read and probe I2C data and voltage level when our board (with UCD9081) attached to USB2ANY .

3-We can read registers of UCD9081.

4- UCD9081 EVM GUI does not found any device or EVM.

5- I2C address of UCD9081 is 0X6F.

6-Summury; We can read UCD9081 registers via USB2ANY program but UCD9081 GUI does not recognize UCD9081 on our board.

Pull-ups, Data rates are verified. 

Best Regards,