• State TI Thinks Resolved
  • Locked Locked
  • Replies 2 replies
  • Answers 1 answer
  • Subscribers 63 subscribers
  • Views 62 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TPS56837H: EN voltage and V-UVLO config

Ohad Fundoianu
Intellectual 270 points
Part Number: TPS56837H

Tool/software:

Hello, 

It is not clear from datasheet why were the R1,R2 resistors of the Vin voltage divider for the V-UVLO were chosen to be : R1=169k, R2=36.1k ? 

How these values support Vin=16v to 28v while UVLO voltage are these ?  -  

Thanks, 

Ohad