Tool/software:
In the datasheet section "8.3.6 CC/CV charging mode", it states that "... the CC threshold VCC_TH determined by user...". But I did not find how to set this value in the datasheet.
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Tool/software:
In the datasheet section "8.3.6 CC/CV charging mode", it states that "... the CC threshold VCC_TH determined by user...". But I did not find how to set this value in the datasheet.
Hi Xuesong,
You can refer to this E2E thread - TPS923655: Regarding the spec of OVP - Power management forum - Power management - TI E2E support forums.
Best Regards,
Steven