Other Parts Discussed in Thread: TPS3430
Tool/software:
Hello,
I'm referring to the orderable part: TPS3436BFACADDFRQ1.
This has letter "F" for output topology/startup delay, meaning "F:Open Drain output, 10 sec".
In my application, I do not want any watchdog start up delay.
If I understand Section 8.3.1.4 "tsd Watchdog Start Up Delay" correctly, this is not possible.
Instead, the 10 sec delay occurs on power up and after each WDO assertion with no way to change this.
Could you please clarify?