Tool/software:
Hi team,
Current datasheet shows below. Why does 6 pin and 12 pin are separated with other GNDP/S? Is it ok to tie to same GND pad?
It seems same GND pad
Best regards,
Hayashi
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Tool/software:
Hi team,
Current datasheet shows below. Why does 6 pin and 12 pin are separated with other GNDP/S? Is it ok to tie to same GND pad?
It seems same GND pad
Best regards,
Hayashi
Hayashi,
Just to be clear: UCC33420 is an isolated DC/DC module. GNDP is the primary side return, GNDS is the secondary side return. Yes, pin 6 can be directly connected to pins 3/4/5 and pin 12 can be directly connected to pins 9/10/11.
Steve
Hi Steven,
Yes I know it is an isolated DCDC module, so GNDS and GNDP must be separated in required creapage and clearance.
Just curious, why are pin 6 is separated with pins 3/4/5?
Regards,
Hayashi