• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 62 subscribers
  • Views 106 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

PMICLOADBOARDEVM: Slew rate issue

Kaixuan Wang
Prodigy 20 points
Part Number: PMICLOADBOARDEVM

Tool/software:

Hello, this is Kaixuan, a hardware engineer from Meta Reality Labs, we purchased a few TI PMICLOADBOARDEVM for load transient test of our PMIC silicon, but we found the slew rate is slower than data sheet shows, shall we schedule a remote meeting? I would like to show TI team my setup and discuss how to solve this issue. I really appreciate it.

  • 0
    TI__Expert 3345 points

    Hi Kaixuan,

    The slew rate correlates to the slew rate of your signal generator that is driving the current load step. So if you want to increase or decrease the slew rate you should increase or decrease the slew rate on the pulse waveform from your signal generator.

    BR,

    Sam G.