• State
  • Locked Locked
  • Replies 2 replies
  • Subscribers 65 subscribers
  • Views 130 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

BQ34Z100EVM: BQ34Z100EVM

VIDIT TYAGI
Prodigy 10 points
Part Number: BQ34Z100EVM
Other Parts Discussed in Thread: EV2400, BQSTUDIO

Tool/software:

HI,

1. I am using a BQ34Z100EVM Board with Arduino UNO and write the code wire library in arduino to take i2c data but I don't receive any data in arduino

2. Arduino is also not connected with BQ Studio.

3. Can I use Bq34z100evm without EV2300 or EV2400 to get the battery health .

4.How I can check the BQ34z100EVM board firmware is loaded properly 

Please suggest how I can make connections and firmware for the Arduino to get the battery status and battery health from the BQ34Z100EVM BOARD with 24V battery 

  • 0
    TI__Mastermind 35121 points

    Hello,

    Today's a national holiday. We will get back to you tomorrow.

    Regards,

    TI Apps Team

  • 0 in reply to Adrian
    TI__Mastermind 19740 points

    Hi,

    1) do you have delays in between sending and receiving data?

    2) You cannot use BQstudio with an Arduino. You will need an EV2400 to use BQstudio.

    3) you can read SOH with the gauge using an external micro controller and calling the sending cmd.

    4) Can you explain what you mean by this?

    Regards,

    Evan