Other Parts Discussed in Thread: TPS53689T
Tool/software:
Hello Team,
I was looking for the firmware files required for ICX-D(Xeon-D) platform.
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi Siddhi,
I will check if we have these files and get back to you tomorrow.
Regards,
Troy
Hi Siddhi,
We do not have any firmware / config files for this platform and setup on hand.
Regards,
Troy
Hi Troy,
We are also working on Birch Stream-SP platform.
So, can I get firmware files for that project?
Thanks,
Siddhi
Hi Siddhi,
For Birch Stream SP platform I have firmware / configuration files for TPS53689T. Is that the controller you are using?
Regards,
Troy
Hi Siddhi,
I will email you a TPS53689T configuration file for Birch Stream SP.
Regards,
Troy
Hi Troy,
Got the files. Thanks for the files.
Is the only difference in default configs and this file, in NVM USER registers only?
Also, is separate file available for different rails, or is it a generalized file, and then we have make changes as required after importing .xml file?
Thanks,
Siddhi
Hi Siddhi,
The configs that I am sending to you have more changed than just what is in NVM USER registers.
There is a separate config for the smaller side rails, which I will send to you through email now.
Regards,
Troy