This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Tool/software:
Hi,
When I turn on the device with full load condition (1.5A) the unit is going to some kind of protection but when I turn on the device without load than output is perfect even after loading full load (1.5A), I need to make the device on with full load on condition.
Pl resolve this issue as soon as possible
Thanking You.
Hi CS Power,
Thank you for reaching out.
I think the problem is more wrt to noise coupling to the CS pin when full load is turned ON.
Please observe the CS pin with and without load. It might be necessary to increase the capacitance here. Maybe check with upto 120pf and it should be as close as possible to this pin.
Regards,
Harish
Thank you for your suggestion, this really helped me and now output is perfect.
Thank you once again!
Hi cs power,
Thank you for feedback. Glad to know the suggestion helped.
Regards,
Harish