LM70840-Q1: Functional Safety(Safety Manual, Failure Mode, Fit Rate)

Hi Luke,

Luke Park said:

1. is this device satisfied with ISO26262?

The LM70840-Q1 is designed for "Functional Safety-Capable" classification. See below what it means:

Luke Park said:

2. When the Functional Safety-Capable is clicked, document "LM62460-Q1, LM61480-Q1, and LM61495-Q1 Functional Safety FIT Rate, FMD and Pin FMA" is opened.

Do you have document about LM70840-Q1? or can you explain how LM62460 matched with LM70840-Q1?

Thanks for letting us know about the issue. You can use LM70880-Q1's Functional safety information:

https://www.ti.com/lit/pdf/sffs690

Ben

Hi, Ben

Thanks for your prompt support.

I got two additional questions.

1. where can I find the captured screen regarding "Functional Safety-Capable" classification?

2. Can you support these document? Safety Manual, Failure Mode, Fit Rate

Hi Luke,

Luke Park said:

1. where can I find the captured screen regarding "Functional Safety-Capable" classification?

https://www.ti.com/technologies/functional-safety.html

Just scroll to the bottom of the page.

Luke Park said:

2. Can you support these document? Safety Manual, Failure Mode, Fit Rate

The part needs to have "Functional safety-compliant" classification in order to have a safety manual.

The link that I provided in the previous message has the failure mode and fit rate in the document.

Ben

Hi, Ben

Thanks for prompt feedback. I delivered your message to customer and will let you know if there is more questions and then will close this issue.

Hi Luke,

No problem. Please keep me posted.

Ben

Hi Luke, 

Are there any updates? If not, go ahead and close (by clicking on resolved) the thread and you can open up a new one once there is feedback from the customer. 

Ben