TLV733P: Request for modeling results from previous request

Scott Hudspeth

Part Number: TLV733P

Tool/software:

It was advised I would be provided results of some modeling in "TLV733P: Request for min / typical / max startup time under specific parameters". I did not see any communication with the results of the modeling and the topic is now locked. Is it possible to get these results so I can get this part qualified? Thanks.

over 1 year ago

0 Ishaan Shetye over 1 year ago

TI__Genius 13740 points

Hi Scott,

It took me some time to get set up with Cadence for this project. I will try simulating this and get back to you. Sorry for the miscommunication.

Best regards

Ishaan

0 Ishaan Shetye over 1 year ago in reply to Ishaan Shetye

TI__Genius 13740 points

Hi Scott,

I have requested one of our DV staff to make this measurement. We will try to have the results out to you by end of next week.

0 Nick Butts over 1 year ago

TI__Guru 50025 points

Hi Scott,

See the attached for the simulation results. I ran a Monte Carlo simulation at your condition at several temperature points because the startup time is temperature dependent. I show the statistical information as well as the distribution because the distribution is not perfectly Gaussian, and I am giving you the data to use to calculate the min/typ/max depending on your application temperature range and with consideration to the distribution shape. Also note that I used a somewhat non-standard startup time measurement of 1%-99%; please let me know if you would like a different measurement.

TLV733P_startup_simulations.pptx

Regards,

Nick

0 Scott Hudspeth over 1 year ago in reply to Nick Butts

Prodigy 20 points

Thank you Nick and Ishaan.

I will report these results to our customer and hope they approve the use of this part.

Power management

Power management forum

TLV733P: Request for modeling results from previous request