This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

BQ78Z100: Capacity Gain setting with BQStudio

Part Number: BQ78Z100
Other Parts Discussed in Thread: EV2400, BQSTUDIO

Tool/software:

Gauge team,

Our customer tries setting Capacity Gain using BQStudio and EV2400.  They get an error, and the setting is not accepted.  They tried setting it to 103817 based on the formula in the datasheet.  This is well within the min and max values.  They get an error with a message about the minimum value. 

Min = 2.98E+0.004

Max = 1.19E+006

Do you know why?  What should they do?

Thanks,
Darren

  • Hello Darren,

    It will be easiest to just use the calibration tab in BQStudio. When you do current calibration it will set these values.

    Regards,

    Adrian