BQ24650: BQ24650

Vitalij Vitalij

Prodigy 90 points

Part Number: BQ24650

Tool/software:

Hello. Tell me please... is there a chip similar to BQ24650, but for Boost topology? Thanks for your attention.

4 months ago

0 Christian Moyer 4 months ago

TI__Mastermind 23400 points

Hello Vitalij,

Here is a list of all of our battery chargers:https://www.ti.com/battery-management/charger-ics/products.html

Most of our battery chargers are buck/buck-boost.

We have very limited boost only chargers.

Can you tell me more about your design, to help narrow down the selection?

What is the input voltage?

What is the max battery voltage?

What is the max charge current?

What battery chemistry is this for?

Best Regards,

Christian.

0 Vitalij Vitalij 4 months ago in reply to Christian Moyer

Prodigy 90 points

Привіт. вхідна напруга-120/365В. максимальна напруга акумулятора - 410В. максимальний струм заряду -15А. хімія акумулятора - LiFePO4. бажано DC-DC з MPPT. Дякую за увагу.

0 Christian Moyer 4 months ago in reply to Vitalij Vitalij

TI__Mastermind 23400 points

Hello Vitalij,

I think there might be a communication barrior. I translated your message to english, and the Input voltage and battery voltage are really high. The input voltage is 120/365V? battery is 410V?

Best Regards,

Christian.

0 Vitalij Vitalij 4 months ago in reply to Christian Moyer

Prodigy 90 points

yes yes...let it be from 200 to 250V after MPPT. thank you....I seem to be writing in English.

0 Christian Moyer 4 months ago in reply to Vitalij Vitalij

TI__Mastermind 23400 points

Hello Vitalij,

We do not have any battery charges that can support a 120/365V input and 410V battery. These voltages are really high.

Best Regards,

Christian.

Power management

Power management forum

BQ24650: BQ24650