• State Resolved
  • Locked Locked
  • Replies 3 replies
  • Subscribers 64 subscribers
  • Views 101 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Original question:

TPS25751EVM: Error flashing to device > error cannot read properties of undefined.

TPS25751EVM: Unable to Flash to Device

Joshua Lewis
Prodigy 50 points
Part Number: TPS25751EVM

Tool/software:

Hello,

I'm not able to Flash my configuration to TPS25751EVM device, using the USBCPD Application Customization Tool.

I'm running Windows 10 and I've tried both the web-based and native tools.

The flashing process appears to fail around 70%.

I am able to connect to the EVM and successfully read back the Mode and Buildversion:

  • 0
    Prodigy 50 points

    I was able to verify that I'm able to program the CustomerVersion, even when the process always appears to fail.

      See the output of the console below:

  • +1 in reply to Joshua Lewis
    TI__Mastermind 31066 points

    Hi Joshua, 

    This is currently a known GUI bug and we're working to fix this. As long as the CustomerVersion (0x06) is read back properly then your configuration was properly flashed. 

    I recommend leaving the console window open during the flashing sequence and see if the issue still persists. 

    Thanks and Regards,

    Raymond Lin

  • 0 in reply to Raymond Lin
    Prodigy 50 points

    Yes, I agree the config is being properly flashed, even though it errors out.