This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Tool/software:
Hi TI,
I want to use 1.8V for ON pin to enable TPS22919.
On datasheet, I understood It can use to enable IC. But I want to make sure and double check.
Can I use 1.8V level for ON PIN?
Best regards,
Hi Jihoon,
Von is an input of comparator which will treat the signal as logic high if Von is higher than V_ih irrespective of the exact pin voltage.
I want to use 1.8V for ON pin to enable TPS22919.
This will work.
Best Regards,
Arush