This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Tool/software:
hello,
i face problem in this part i use accumulator mode and enable GE to high and thats counsume18 mico amber
i see this is too much for this ship and i want work with this mode with low consumption this normal or not and how to work wit low power mode
Hello Ahmed,
Let me share with you a section of the datasheet
As you see, these are the typical values for each mode when GE is pulled high. 18 micro amps is below our typical spec.
Regards,
Adrian